Cable drum chock with theft deterrent
Ø 500–2,500 mm · galvanised · lockable
Drums Ø 500–2,500 mm · galvanised steel & recycled plastic · lockable · advice and quotation from Darmstadt
Die cable drum chock for wooden drums hält große Kabeltrommeln von Ø 500 mm to 2,500 mm securely in place. It slides sideways under the flange rim without lifting the drum and can be locked with a padlock.
Cable drum chock up to 2,500 mm diameter – two sizes
| Version | Item no. | Drum Ø | Flange rim up to | Max. drum weight | Weight | Approx. dimensions |
|---|---|---|---|---|---|---|
| Small | DD-SCHK-202271 | 500–1,400 mm | 60 mm | 2,000 kg | 6 kg | 170 × 1,000 × 157 mm |
| Large | DD-SCHK-202272 | 700–2,500 mm | 100 mm | 7,500 kg | 9 kg | 180 × 1,375 × 167 mm |
Sturdy steel construction of square tubes and sheet metal, hot-dip galvanised to DIN EN ISO 1461, outer side coated red. Adjustable in length for different drum sizes, with linchpin and anti-slip pads on the contact surfaces. The instructions for use permit two chocks on one drum; this does not automatically increase the permissible drum weight. Item no. DD-SCHK-202271 (small) and DD-SCHK-202272 (large). Padlock not included – available separately (item no. DD-SCHK-E1VHB-L63). Technical data from manufacturer documentation, as of October 2026. You receive the complete data and conditions of use with the quotation.
Fitting the chock without lifting the drum
- Set the drum down on level, load-bearing ground while it is still held by the crane chains.
- Pull both halves of the chock apart and slide them sideways under the flange rims.
- Push them together to fit and lock with the linchpin; add a padlock if required.
Goes well with
- Padlock for the cable drum chock (item no. DD-SCHK-E1VHB-L63) – theft deterrent
- Outrigger pads for soft ground
- Heavy-duty wheel chock as additional protection
- Steel storage bay signs for fixed storage bays
Selection guide: which drum protection fits?
Non-binding guidance based on manufacturer data – we confirm the final selection with you in the quotation.
When the cable drum chock must not be used
- Never without the linchpin, and never with a substitute instead of the original pin.
- Not on steeply sloping ground.
- On very soft ground the chock can sink in – place load-spreading pads underneath first.
- Never above the permissible drum weight (2,000 kg or 7,500 kg per chock).
FAQ: cable drum chock
Which cable drum chock fits my drum?
Measure the drum diameter and the width of the flange rim. The small version (DD-SCHK-202271) is designed for Ø 500–1,400 mm, rims up to 60 mm and drums up to 2,000 kg; the large version (DD-SCHK-202272) for Ø 700–2,500 mm, rims up to 100 mm and up to 7,500 kg. All three values must be within the range of the chosen version.
Is the cable drum chock suitable for outdoor use?
Yes, the galvanised steel version is designed for construction sites and outdoor storage.
Do I need one chock per drum?
Yes, each drum is secured individually. Volume prices for several drums are available on request.
Alle Produkte dieser Seite sind auch direkt im Shop von DEDE Industrieausstattung (German).
Can I secure a drum on site without a drum stand?
Yes. The chock slides directly under the flange rim while the drum stands on the ground. No drum stand is needed.
What is the difference between a drum chock and a drum stand?
A drum stand or jack lifts the drum so that it can turn for unwinding. The cable drum chock holds a standing drum in place so that it cannot roll away.
Is there a lockable drum chock to deter theft?
Yes, the chock is prepared for a padlock; the padlock is available separately.
Note: Employers must assess the hazards of storing and handling cable drums and define suitable protective measures in line with the occupational safety regulations of their country, taking the manufacturer’s instructions into account. This page is not legal advice; please involve your occupational safety specialist.
Request the right drum protection
Drum Ø, flange width, quantity, location – reply within 24 hours on working days.
info@kabeltrommelsicherung.de · Phone +49 6151 787 7805